ABB AC500 PLC Hardware Manual page 1198

System Assembly, Construction and Connection
AC500-eCo > Mechanical Dimensions
2.5.2.2 Mechanical Dimensions AC500-eCo
Fig. 202: Side, front and back view
2.5.2.3 Mechanical Dimensions S500-eCo
1198
NOTICE!
Horizontal mounting is highly recommended.
Vertical mounting is possible, however, derating consideration should be made
to avoid problems with poor air circulation and overheating (see
2.6.1.1 "Environmental Conditions" on page 1248).
By vertical mounting, always place an end-stop terminal block (e.g. type BADL,
P/N: 1SNA399903R0200) on the bottom and on the top of the modules to prop-
erly secure the modules.
By high vibration applications and horizontal mounting, we also recommend to
place end-stop terminals at the right and left side of the device to properly
secure the modules, e.g. type BADL, P/N: 1SNA399903R0200.
All mechanical dimensions are given in millimeters and inches. The value in
brackets is the inch-value.
All mechanical dimensions are given in millimeters and inches. The value in
brackets is the inch-value.
3ADR010121, 13, en_US
Ä Chapter
2019/04/17