ABB AC500 PLC Hardware Manual page 1275

Number of cores per terminal
1 with wire end ferrule without plastic
sleeve
1 with wire end ferrule with plastic
sleeve
2
2
2 with TWIN wire end ferrule (length
10 mm) with plastic sleeve
2 with separate wire end ferrule
without plastic sleeve
Terminal type: Front terminal, conductor connection vertically with respect to the printed circuit board.
Spring Terminal
Parameter
Type
Degree of protection
Stripped conductor end
Needed tool
Dimensions
Number of cores per terminal
1
1
1 with wire end ferrule
2
2
2 with TWIN wire end ferrule (length
10 mm) with plastic sleeve
2019/04/17
Conductor type
Flexible
Flexible
Solid
Flexible
Flexible
Flexible
Value
Front terminal
IP 20
9 mm, min. 8 mm
Slotted screwdriver
2.5 x 0.4 to 3.5 x 0.5 mm, screwdriver must be at least 15 mm
free of insulation at the tip
Conductor type
Solid
Flexible
Flexible
Solid
Flexible
Flexible
3ADR010121, 13, en_US
System Assembly, Construction and Connection
AC500 (Standard) > Connection and Wiring
Cross section
0.08 mm² to 2.5 mm²
0.14 mm² to 1.5 mm²
0.08 mm² to 1.5 mm²
0.08 mm² to 1.5 mm²
2 x 0.5 mm² to 2 x 1.0 mm²
0.08 mm² to 0.75 mm²
Cross section
0.08 mm² to 2.5 mm²
0.08 mm² to 2.5 mm²
0.25 mm² to 1.5 mm²
Not intended
Not intended
2 x 0.25 mm² or 2 x 0.5 mm² or
2 x 0.75 mm², with square cross-sec-
tion of the wire-end ferrule also
2 x 1.0 mm²
1275