ABB AC500 PLC Hardware Manual page 1090

Device Specifications
Communication Interface Modules (S500) > PROFINET
1.7.6.5.7 Parameterization
Parameters of the Module
Name
Module ID
Parameter length Internal
Error LED / Fail-
safe function
see table
Remarks:
1
) With a faulty module ID, the module reports a "parameter error" and does not perform cyclic
process data transmission
Table 190: Error LED / Failsafe function
Setting
On
Off by E4
Off by E3
On + Failsafe
Off by E4 + Failsafe
Off by E3 + Failsafe
All values are validated during the parameterization of the CI506-PNIO according to the
appended expansion modules. In the case of error, a diagnostic message "parameter error" is
generated and the cyclic process data transfer is terminated.
Parameters of the 2 Serial Channels
Name
Behavior for serial channel
communication during
PROFINET communica-
tion fault
Number of frames/data
blocks in reception FIFO
1090
Value
1 Internal
)
On
Off by E4
2
)
Off by E3
On + failsafe
Off by E4 + fail-
safe
Off by E3 + fail-
safe
Description
Error LED lights up at errors of all error classes, Failsafe-
mode off
Error LED lights up at errors of error classes E1, E2 and E3,
Failsafe-mode off
Error LED lights up at errors of error classes E1 and E2, Fail-
safe-mode off
Error LED lights up at errors of all error classes, Failsafe-
mode on
Error LED lights up at errors of error classes E1, E2 and E3,
Failsafe-mode on
Error LED lights up at errors of error classes E1 and E2, Fail-
safe-mode on
Value
Stop communica-
tion and reset FIFO
Continue serial
communication
1...40
3ADR010121, 13, en_US
Internal value Internal value,
type
7015 WORD
33 BYTE
0 BYTE
1
3
16
17
19
2 )
Internal value Internal
0
1
1...40
Default
7015
33
0
Default
value, type
BYTE 0
BYTE 1
2019/04/17