ABB AC500 PLC Hardware Manual page 1223

Technical Data
Parameter
Memory capacity
Temperature range
No. of writing cycles
No. of reading cycles
Data safety
Write Protect Switch
Weight
Dimensions
Further information on using the SD memory card in AC500 PLCs is provided in the chapter
Storage Devices.
Ordering Data
Part No.
1SAP 180 100 R0001
2.5.5.2 MC503 - SD Memory Card Adaptor
Intended Pur- The MC503 SD memory card adaptor is used for expanding processor modules PM55x-xP or
pose PM56x-xP with a SD memory card slot. A SD memory card (MC502) is not included in the
scope of delivery and must be ordered separately.
The SD memory card can be used for:
● saving process data,
● saving user programs,
● upgrading the firmware.
2019/04/17
It is not possible to use 100 % of a device's memory space. About 10 % of the
total available space must remain unused at any time to maintain normal device
operation.
Description
MC502, SD memory card
*) For planning and commissioning of new installations use modules in Active
status only.
3ADR010121, 13, en_US
System Assembly, Construction and Connection
AC500-eCo > Handling of Accessories
Value
Up to 2 GB, for exactly size see type plate
-20 °C...+85 °C
> 100 000
No limitation
> 10 years
Yes, at the edge of the SD memory card
2 g
24 mm x 32 mm x 2.1 mm
Product Life Cycle Phase *)
Active
1223