ABB AC500 PLC Hardware Manual page 1172

Device Specifications
Accessories > S500
1.8.4.5 TA526 - Wall Mounting Accessory
Purpose If a terminal base TB5xx or a terminal unit TU5xx should be mounted with screws, the wall
mounting accessories TA526 must be inserted at the rear side first. This plastic parts prevent
bending of terminal bases and terminal units while screwing up.
Handling Handling of the wall mounting accessory is described in detail in the section Mounting and Dis-
Instructions assembling the Terminal Unit
bling Terminal Bases and Function Module Terminal Bases
on page 1262.
Technical Data
Parameter
Weight
Dimensions
Ordering Data
Part No.
1SAP 180 800 R0001
1.8.4.6 TA535 - Protective Caps for XC Devices
Purpose Accessory to cover unused connectors of XC devices in salt mist environments.
One TA535 package includes 3 different cap types (20 pieces per type):
● Cap for RJ45 connectors
● Cap for 9-pole D-sub connector
● Cap for FieldBusPlug connector
Protection should be done for all unused slots of -XC devices.
Ordering Data
Part No.
1SAP 182 300 R0001
1172
Ä "Mounting with Screws" on page 1264 and Mounting/Disassem-
Description
TA526, wall mounting acces-
sory
*) For planning and commissioning of new installations use modules in Active
status only.
Description
TA535, Protective Caps for
XC devices, 20 x 3 pieces
3ADR010121, 13, en_US
Ä "Mounting with Screws"
Value
5 g
67 mm x 35 mm x 5,5 mm
Product Life Cycle Phase *)
Active
Product Life Cycle Phase *)
Active
2019/04/17