ABB AC500 PLC Hardware Manual page 350

Device Specifications
I/O Modules > Digital I/O Modules
LED
Technical Data
The System Data of AC500 and S500
valid for standard version.
The System Data of AC500-XC
valid for the XC version.
Only additional details are therefore documented below.
Parameter
Process supply voltage UP
Current consumption
Weight (without terminal unit)
350
State
Inputs Digital input
I0...I31
UP Process
supply
voltage
24 VDC via
terminal
CH-ERR1 Channel
error, error
CH-ERR2
messages in
groups (dig-
CH-ERR3
ital inputs
CH-ERR4
combined
into the
groups 1, 2,
3, 4)
) Module error Red
2
CH-ERR
1
) Indication LED is ON even if an input signal is applied to the channel and the
supply voltage is off. In this case the module is not operating and does not gen-
erate an input signal.
2
) All of the LEDs CH-ERR1 to CH-ERR4 light up together
Connections
Rated value
Max. ripple
Protection against reversed voltage
Rated protection fuse for UP
Galvanic isolation
From 24 VDC power supply at the ter-
minals UP/L+ and ZP/M of the CPU/bus
module
From UP at normal operation
Inrush current from UP (at power up)
3ADR010121, 13, en_US
Color LED = OFF
Yellow Input = OFF Input = ON
Green Process
supply
voltage is
missing
Red No error or
process
Red
supply
voltage is
Red
missing
Red
--
Ä Chapter 2.6.1 "System Data AC500" on page 1248 are
Ä Chapter 2.7.1 "System Data AC500-XC" on page 1309 are
Value
Terminals 1.8, 2.8, 3.8 and 4.8 for +24 V (UP)
as well as 1.9, 2.9, 3.9 and 4.9 for 0 V (ZP)
24 VDC
5 %
Yes
10 A fast
Yes, per module
ca. 2 mA
0.15 A
0.008 A²s
ca. 105 g
LED = ON LED flashes
--
1 )
Process --
supply voltage
OK
Severe error Error on one
within the cor- channel of the
responding corresponding
group group
Internal error --
2019/04/17