S500-Eco - ABB AC500 PLC Hardware Manual

Device Specifications
Accessories > S500-eCo

1.8.3 S500-eCo

1.8.3.1 TA566 - Wall Mounting Accessory
Intended Pur- The TA566 wall mounting accessory is used for mounting S500-eCo I/O modules and AC500-
pose eCo processor modules without DIN rail.
Handling The TA566 is snapped into the back side of the device's housing
Instruction and Demounting of S500-eCo I/O Modules" on page 1203.
Technical Data
Parameter
Weight
Dimensions
Ordering Data
Part No.
1TNE 968 901 R3107
1.8.3.2 TA563-TA565 - Terminal Blocks
Intended Pur- The TA563-TA565 terminal blocks are used to connect process signals and process voltages to
pose AC500-eCo I/O modules and AC500-eCo processor modules (with -P extension inside their
type designator only). 3 different kind of terminal blocks are available:
● Screw terminals with cable insertion on the side
● Screw terminals with cable insertion on the front
● Spring terminals with cable insertion on the front
Of each kind, 2 sizes are available:
● Terminals with 9 poles
● Terminals with 11 poles.
There are 2 compatible variants of each kind and size.
1164
Description
TA566, wall mounting acces-
sory, 100 pieces
*) For planning and commissioning of new installations use modules in Active
status only.
These terminal blocks must only be used with AC500-eCo I/O Modules and
AC500-eCo processor modules.
3ADR010121, 13, en_US
Ä Chapter 2.5.3.2 "Mounting
Value
5 g
29 mm x 28 mm x 5 mm
Product Life Cycle Phase *)
Active
2019/04/17