Ac500 (Standard) - ABB AC500 PLC Hardware Manual

Parameter
Max. cable length for CS31 system bus
Specification for external termination resistor
Length
Weight
Isolation voltage
Surge voltage (common mode)
1.8.1.10.5 Ordering Data
Part No.
1SAP 186 100 R0001

1.8.2 AC500 (Standard)

1.8.2.1 MC502 - SD Memory Card
● Secure digital card
● Solid state flash memory storage
Purpose The SD memory card is used to back-up user data and store user programs or project source
codes as well as to update the internal CPU firmware. The processor modules can be operated
with and without SD memory card.
AC500/AC500-eCo processor modules are supplied without SD memory card. It therefore must
be ordered separately.
The MC memory card can be read on a PC with a standard memory card reader. AC500 pro-
cessor modules are equipped with an MC memory card reader.
For AC500-eCo processor modules the device must be equipped with a MC503 SD memory
card adaptor
2019/04/17
Description
TK506, RS-485 isolator D-sub
5 terminal
*) For planning and commissioning of new installations use modules in Active
status only.
Ä Chapter 1.8.1.2 "MC503 - SD Memory Card Adaptor" on page 1104.
The SD memory card has a write protect switch. In the position "LOCK", the
card can only be read.
3ADR010121, 13, en_US
Accessories > AC500 (Standard)
Value
500 m with cable cross section 0.5 mm² or 400
m with cable cross section 0.22 mm²
120 W, 1 %, 0.25 W
0.6 m
80 g
500 VDC (type test)
1000 V (type test)
Product Life Cycle Phase *)
Active
Device Specifications
1145