ABB AC500 PLC Hardware Manual page 1024

Device Specifications
Communication Interface Modules (S500) > PROFINET
Interface
1.7.6.2.4 Internal Data Exchange
Parameter
Digital inputs (bytes)
Digital outputs (bytes)
Analog inputs (words)
Analog outputs (words)
Counter input data (words)
Counter output data (words)
1.7.6.2.5 Addressing
1.7.6.2.6 I/O Configuration
The CI501-PNIO stores some PROFINET configuration parameters (I/O device identifier, I/O
device type and IP address configuration). No more configuration data is stored.
The analog/digital I/O channels are configured via software.
Details about configuration are described in Parameterization
zation" on page 1024.
1.7.6.2.7 Parameterization
Parameters of the Module
Name
Module ID
Parameter length Internal
Error LED / Fail-
safe function see
table Error LED /
Failsafe function
1024
Pin
8
Shield
For further information regarding wiring and cable types see chapter Ethernet
Ä Chapter 2.6.4.10 "Ethernet Connection Details" on page 1288.
The module reads the position of the rotary switches only during power-up, i. e.
changes of the switch position during operation will have no effect until the next
module initialization.
Value
Internal
1 )
On
Off by E4
3ADR010121, 13, en_US
Signal
NC
Cable shield
Value
3
3
4
2
4
8
Ä Chapter 1.7.6.2.7 "Parameteri-
Internal value Internal value,
type
7000 WORD
25 BYTE
0 BYTE
1
Description
not used
Functional earth
Default
7000
25
0
2019/04/17