ABB AC500 PLC Hardware Manual page 1026

Device Specifications
Communication Interface Modules (S500) > PROFINET
1 )
2
)
3 )
Table 166: Error LED / Failsafe function
Setting
On
Off by E4
Off by E3
On +Failsafe
Off by E4 + Failsafe
Off by E3 + Failsafe
*) The parameters Behaviour AO at comm. error and Behaviour DO at comm. error are only
analyzed if the Failsafe-mode is ON.
Group Parameters for the Analog Part
Name
Analog data
format
Behaviour AO at
comm. error *)
*) The parameter Behaviour AO at comm. error is only analyzed if the Failsafe-mode is ON.
1026
With a faulty ID, the modules reports a "parameter error" and does not perform
cyclic process data transmission.
As for device index C0 the parameter is no longer evaluated.
Counter operating modes, see description of the Fast counter
1.5.1.2.10 "Fast Counter" on page 394.
Value
Standard
Reserved
Off
Last value
Last value 5 s
Last value 10 s
Substitute value
Substitute value
5 s
Substitute value
10 s
3ADR010121, 13, en_US
Description
Error LED (S-ERR) lights up at errors of all
error classes, Failsafe-mode off
Error LED (S-ERR) lights up at errors of error
classes E1, E2 and E3, Failsafe-mode off
Error LED (S-ERR) lights up at errors of error
classes E1 and E2, Failsafe-mode off
Error LED (S-ERR) lights up at errors of all
error classes, Failsafe-mode on *)
Error LED (S-ERR) lights up at errors of error
classes E1, E2 and E3, Failsafe-mode on *)
Error LED (S-ERR) lights up at errors of error
classes E1 and E2, Failsafe-mode on *)
Internal value Internal value,
type
0 BYTE
255
0 BYTE
1
6
11
2
7
12
Ä Chapter
Default
0
0
2019/04/17