Profinet - ABB AC500 PLC Hardware Manual

Device Specifications
Communication Interface Modules (S500) > PROFINET
1.7.5.2.11 Ordering Data
Part No.
1SAP 224 200 R0001 CI542-DP, PROFIBUS DP bus module,
1SAP 424 200 R0001 CI542-DP-XC, PROFIBUS DP bus

1.7.6 PROFINET

1.7.6.1 Comparison of the CIxyz-PNIO Modules
The PROFINET IO devices combine the advantages of decentralized I/O modules with the
reaction time of AC500 mounted central I/O modules. The devices for PROFINET provide the
extension -PNIO in the device name.
The Communication Module CM579-PNIO acts as IO Controller in a PROFINET network. It is
connected to the Processor Module via an internal communication bus. Depending on the Ter-
minal Base, several Communication Modules can be used for one Processor Module.
The Communication Interface Modules CIxyz-PNIO act as IO Devices in a PROFINET network.
Additionally the communication module CM589-PNIO(-4) can be used to setup a AC500 PLC to
act as IO Device in a PROFINET network.
The difference of the CIxyz-PNIO devices can be found in their input and output characteristics
Ä Chapter 1.7.6.1.1.1 "Characteristics of CI50x-PNIO" on page 1004. The characteristics for
CM589-PNIO(-4) can be found in the device description for CM589-PNIO
on page 143.
1.7.6.1.1 PROFINET IO Devices CI50x-PNIO
Characteristics of CI50x-PNIO
Parameter
Bus connection
Switch
Technology
Transfer rate
Transfer method
Ethernet
Expandability
Adjusting elements
1004
Description
8 DI, 8 DO and 8 DC
module, 8 DI, 8 DO and 8 DC,
XC version
*) For planning and commissioning of new installations use modules in Active
status only.
3ADR010121, 13, en_US
Product Life Cycle Phase *)
Active
Active
Value
2 x RJ45
Integrated
Hilscher netX100
10/100 Mbit/s (full-duplex)
According to Ethernet II, IEE802.3
100 base-TX, internal switch, 2x RJ45 socket
Max. 10 S500 I/O modules
2 rotary switches for generation of an explicit
name
Ä Further information
2019/04/17