ABB AC500 PLC Hardware Manual page 1062

Device Specifications
Communication Interface Modules (S500) > PROFINET
LED
STA2 ETH
(System LED
"SF")
S-ERR
I/O-Bus
ETH1
ETH2
Table 177: States of the 29 Process LEDs
LED
DC0 to DC7
DI8 to DI15
DO8 to DO15
UP
UP3
CH-ERR1 to CH-
ERR3
1.7.6.3.9 Technical Data
The System Data of AC500 and S500
valid for standard version.
The System Data of AC500-XC
valid for the XC version.
1062
Color OFF
Red ---
Green ---
Red No system error
Red No error
Green No expansion
modules con-
nected or com-
munication error
Green No connection at
Ethernet inter-
face
Yellow ---
Green No connection at
Ethernet inter-
face
Yellow ---
Color OFF
Yellow Input/Output is
OFF
Yellow Input is OFF
Yellow Output is OFF
Green Process supply
voltage missing
Green Process supply
voltage missing
Red No error or
process supply
voltage missing
Ä Chapter 2.6.1 "System Data AC500" on page 1248 are
Ä Chapter 2.7.1 "System Data AC500-XC" on page 1309 are
3ADR010121, 13, en_US
ON Flashing
--- Device is not
configured
--- Got identification
request from I/O
controller
System error ---
(collective error)
Internal error --
Expansion mod- ---
ules connected
and operational
Connected to ---
Ethernet inter-
face
Device is trans- Device is trans-
mitting telegrams mitting telegrams
Connected to ---
Ethernet inter-
face
Device is trans- Device is trans-
mitting telegrams mitting telegrams
ON Flashing
Input/Output is --
ON
Input is ON (the --
input voltage is
even displayed if
the supply
voltage is OFF)
Output is ON --
Process supply --
voltage OK and
initialization fin-
ished
Process supply --
voltage OK
Internal error Error on one
channel of the
corresponding
group
2019/04/17