12.1 General information geared motor with SINAMICS G115D Motor Mounted / Wall Mounted
B
K
C
Stage
(-)
E
Z
D
Type
12.1.14.3
General technical data
Exceeding the power limits
Exceeding the power limits (max. speeds, max. torque etc.) of the gearbox or motor can
damage the geared motor.
Maintain the permissible operating ranges and power limits of the motor and gearbox.
The max. speeds and torque shown indicate the mechanical limits of the geared motor.
Depending on the application, also take into account thermal limits. In applications with long
max. speed components, high pressure build-up may occur in the gearbox, which can cause
damage to the gearbox (e.g. leakage).
The most important technical data appears on the rating plate of the gearboxes and geared
motors.
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
Bevel gearbox, two-stage
Bevel gearbox, three-stage
Helical worm gearbox
Single-stage
Two-stage
Three-stage
Shaft
(-)
Solid shaft
A
Hollow shaft
Mounting type gearbox
(-)
Foot-mounted design
B
Foot / flange-mounted design
F
Flange-mounted design (A type)
Z
Housing flange (C type)
D
Torque arm
G
Flange (A type) opposite output shaft
Connection
(-)
Parallel key
S
Shrink disk
T
Hollow shaft with splines
R.
SIMOLOC assembly system
Special features
W
Reduced-backlash version
WARNING
Additional information on the SIMOGEAR geared motor
441