Creating A Project; Integrating The Converter Into The Project - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive for conveyor applications

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Creating a project

1. Start the Startdrive commissioning software.

2. Switch to project view by clicking on the link at the bottom left of the window, as shown

3. In the menu, select the following command:

4. Specify a name of your choice for the project.

You have created a new project.

1. Switch on the converter power supply.

2. Remove the commissioning cover (

driver and insert a USB cable to establish the connection between your PC and the converter.

Reattach the commissioning cover with a tightening torque of 2.5 Nm (22.1 lbf.in).

3. The PC operating system installs the USB driver when you are connecting the converter and

PC together for the first time.

4. Click on the

SINAMICS G115D Wall Mounted distributed drive

Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA

) from the G115D converter by using an S12 hex nut

button in the toolbar to open the window of accessible devices.

Commissioning

6.4 Quick commissioning