Technical Data And Drawings; Standards And Regulations - Siemens SINAMICS PERFECT HARMONY GH150 6SL3826 Operating Instructions Manual

Technical data and drawings

An overview of general and specific technical data of the device is provided in the following.
Further, you will find directives relating to the conditions that you must comply with when using
the described device.
Note
Finding technical data and drawings
You will find plant-specific information in the separate document "Technical data and drawings."
B.1

Standards and regulations

Table B-1
Standards
EU Directives
North American direc‐
tives
Insulation
Protection class
Emitted interference
SINAMICS PERFECT HARMONY GH150 6SL3826
Operating Instructions 05/2020
Standards and regulations
Standards and regulations
EMC requirements including special test procedures and techniques
IEC 61800-3 Ed 2
General requirements, definitions for dimensioning AC power drive systems
IEC 61800-4 Ed. 1
Requirements regarding safety – electrical, thermal and energy requirements
IEC 61800-5-1 Ed. 2
Low-voltage directive 2014/95/EU
Electromagnetic compatibility 2014/108/EU
CSA C22.2 No. 274-13 Adjustable Speed Drive
Degree of pollution 2 according to IEC 61800-5-1
Class 1 according to IEC 61800-5-1
This drive unit is part of a PDS, Category C4 according to IEC 61800-3. The
drive unit has not been designed to be connected to the public line supply. The
equipment can cause electromagnetic interference when it is connected to the
public network. The essential requirements placed on EMC protection for the
drive system should be secured using an EMC plan at the customer site.
B
125