Technical Data And Drawings; Technical Specifications; Standards And Regulations; Table B-1 Standards And Conformity - Siemens 6SL3845-2NN41-8AD2 Operating Instructions Manual

Technical data and drawings

B.1

Technical specifications

An overview of general and specific technical data of the device is provided in the following.
Further, you will find directives relating to the conditions that you must comply with when using
the described device.
B.1.1

Standards and regulations

Table B-1 Standards and conformity
Standards
EU directives
Certificate of compliance
with order
Interference omission
Insulation
Degree of protection
Protection class
Touch protection
SINAMICS SM150 6SL3845-2NN41-8AD2
Operating Instructions Rev.201910281310 EXAMPLE
Standards
DIN EN 61800-3/VDE 0160 T103 (IEC 61800-3)
DIN EN 61800-4 / VDE 0160 T104 (IEC6 1800-4), however, only when referenced in the
standards DIN EN 61800-3 or DIN EN 61800-5-1
DIN EN 61800-5-1/VDE 0160 T105 (IEC 61800-5-1)
2014/35/EU + amendments (Low Voltage Directive)
2014/30/EU + amendments (Electromagnetic Compatibility)
For the EMC Directive (2004/108/EC + amendments or 2014/30/EU + amendments)
(Product cannot be operated independently; limited distribution channel)
This drive unit is part of a PDS, Category C4 according to DIN EN 61800-3/
VDE 0160 T103 (IEC 61800-3). The drive unit has not been designed to be connected to the
public line supply. The equipment can cause electromagnetic interference when it is connected
to the public grid. The essential requirements placed on EMC protection for the drive system
should be secured using an EMC plan at the customer site.
According to DIN EN 50178/VDE 0160 (IEC 62103), IEC 61800-5-1:
Pollution degree 2 (without conductive pollution), non-condensing
In accordance with DIN VDE 0470 T1, EN 60 529, IEC 60 529
Class 1 according to DIN EN 61800-5-1/VDE 0160 T105 (IEC 61800-5-1)
DIN EN 50274/VDE 0660 T514
B
173