Preparing The Memory Card; Upgrading The Firmware - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive for conveyor applications

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Preparing the memory card

You can load the converter firmware from the Internet to a memory card.

Precondition

You have the appropriate memory card.

1. Download the required firmware to your PC from the Internet.

2. Extract the files to a directory of your choice on your PC.

3. Transfer the unzipped files into the root directory of the memory card.

Depending on the firmware, the filenames and the number of files may differ from the display

The "USER" directory does not exist on unused memory cards. After the memory card is

plugged in for the first time, the converter creates a new "USER" directory.

You have prepared the memory card for the firmware upgrade or downgrade.

When upgrading the firmware, you replace the converter firmware with a newer version.

Precondition

• Converter and memory card have different firmware versions.

• You have the memory card with the firmware for that particular converter.

SINAMICS G115D Wall Mounted distributed drive

Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA

Memory cards (Page 352)

Download (https://support.industry.siemens.com/cs/ww/en/view/67364620)

Corrective maintenance

10.6 Firmware upgrade and downgrade