Protocols Used - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive for conveyor applications

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

5.13 Connecting to PROFINET and Ethernet

• Device replacement without removable data storage medium: the replaced converter

obtains the device name from the IO controller – not from its memory card or programming

• Shared Device for converters that support PROFIsafe

The converter as Ethernet node

Further information on PROFINET

Further information on PROFINET can be found on the Internet:

automation/en/industrial-communications/profinet/Pages/Default.aspx)

Further information on the operation as Ethernet nodes can be found in the Function Manual

"Fieldbuses".

Protocols used

The converter supports the protocols listed in the following tables. The address parameters, the

relevant communication layer as well as the communication role and the communication

direction are specified for each protocol.

You require this information to set the appropriate safety measures to protect the automation

system, e.g. in the firewall.

PROFINET system description

PROFINET - the Ethernet standard for automation

Overview of the manuals (Page 588)

(https://support.industry.siemens.com/cs/ww/en/view/

(http://w3.siemens.com/mcms/

SINAMICS G115D Wall Mounted distributed drive

Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA