Commissioning Tools - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive for conveyor applications
Hide thumbs Also See for SINAMICS G115D:
Table of Contents

Advertisement

Commissioning
6.2 Commissioning tools
6.2

Commissioning tools

PC tool - Startdrive
Startdrive is a PC tool that is used to commission, troubleshoot and control the drive, as well as
to back up and transfer the drive settings. You can connect the PC with the converter via a USB
cable or via the PROFINET fieldbus. The maximum permissible length of the USB cable is 3 m.
For the PROFINET variant, the supported Startdrive version is 16.4 or later.
For the AS-i and I/O variants, the supported Startdrive version is 16.5 or later.
System requirements and download
109771710)
Note
Commissioning and/or diagnostic failure resulting from unsafe mobile device or PC
Using unsafe mobile devices or PC to commission and/or diagnose the converter through
commissioning tools can cause system failure or unsafe operating status in your system.
• Maintain the mobile device or PC for commissioning and diagnostics according to the
security guidelines, for example, by deploying the patches for the operating system,
activating firewalls, or using a virus scanner.
SINAMICS G120 Smart Access
The SINAMICS G120 Smart Access is a Web server module and an engineering tool that
provides wireless connection to a PC, a tablet, or a smartphone. It has been designed for
quick setup, parameterization and diagnostics of the supported SINAMICS G120 converter or
SINAMICS G115D converter. The SINAMICS G120 Smart Access is only for commissioning and
thus cannot be used with the converter permanently.
Operating instructions of the SINAMICS G120 Smart Access:
Compliance with the General Data Protection Regulation
Siemens respects the principles of data protection, in particular the data minimization rules
(privacy by design).
For this product, it has the following meaning:
The product neither processes nor stores any person-related data. The product only processes
or stores technical function data (e.g. time stamps). If you link these data with other data
(e.g. shift plans) or store person-related data on the same data medium (e.g. hard disk), i.e,
personalizing the data, you must ensure full compliance with the applicable data protection
stipulations.
106
Internet: Startdrive download
Overview of the manuals (Page 588)
(https://support.industry.siemens.com/cs/ww/en/view/
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA

Advertisement

Table of Contents
loading

Table of Contents