Data Backup And Series Commissioning - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive for conveyor applications

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Data backup and series commissioning

Saving settings outside the converter

After commissioning, your settings are saved in the converter so that they are protected against

power failure.

We recommend that you additionally back up the settings on a storage medium outside the

converter. Without backup, your settings could be lost if the converter develops a defect.

The following storage media are available for your settings:

• Memory card

• SINAMICS G120 Smart Access

Carrying out series commissioning

Series commissioning is the commissioning of several identical converters.

Precondition

The converter to which the settings are transferred has the same article number and the

same or a later firmware version as the source converter.

Overview of the procedure

1. Commission the first converter.

2. Back up the settings of the first converter to an external storage medium.

3. Transfer the settings from the first converter to an additional converter via the data storage

SINAMICS G115D Wall Mounted distributed drive

Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA