Mounting Positions; General Notes On Mounting Positions - Siemens SINAMICS G115D Operating Instructions Manual

12.3.31

Mounting positions

12.3.31.1

General notes on mounting positions

Only operate the gearbox in the mounting position specified on the rating plate. This ensures
that the correct quantity of lubricant is provided.
The symbols are shown for the standard mounting position.
Note
Gearbox sizes 19 and 29
Gearbox sizes 19 and 29 are lubricated for life. There is no opening to check the oil level.
In mounting positions M2 and M4 the gearboxes have a breather valve.
C29 has a breather valve in all mounting positions.
Note
Worm gearbox or worm geared motor
Gearboxes are lubricated for life. There are no openings to check the oil level.
Description of the symbols:
Venting
A, B
*
①
②
③
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
Position of insert shaft / solid shaft
On opposite side
Oil level check not possible for tandem gearbox (main gearbox a)
Two-stage gearbox
Three-stage gearbox
Additional information on the SIMOGEAR geared motor
Oil level
12.3 Specific data gearbox
Oil drain
527