Corner Turntable Lift, Two Positions And One Speed (P3393 = 9) - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive for conveyor applications

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Corner turntable lift, two positions and one speed (p3393 = 9)

With p3393 (conveyor technology application) set to 9, the converter enables a corner turntable

lift in a conveyor system to move up and down with a fixed speed and stop at two dedicated

positions. Two sensors are required to signal the limit positions for the motor to stop.

Precondition

• You interconnect the signals of the sensors with the digital inputs of your choice.

• To make sure that the corner turntable lift moves between the higher position and the lower

position, the end position shutdown must be activated with p3392 set to 1.

SINAMICS G115D Wall Mounted distributed drive

Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA

7.9 Conveyor technology control functions (for G115D PROFINET and AS-i variants only)

Advanced commissioning