Turntable, Two Positions And One Speed (P3393 = 5) - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive for conveyor applications

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Turntable, two positions and one speed (p3393 = 5)

With p3393 (conveyor technology application) set to 5, the converter enables a turntable in a

conveyor system to rotate in either positive or negative direction with a fixed speed and stop at

two dedicated positions. Two sensors are required to signal the limit positions for the motor to

Precondition

• You interconnect the signals of the sensors with the digital inputs of your choice.

• Depending on the specific application and mechanical setup, you must set end position

shutdown active (p3392) to 1, so as to limit the turntable movement between the dedicated

SINAMICS G115D Wall Mounted distributed drive

Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA

7.9 Conveyor technology control functions (for G115D PROFINET and AS-i variants only)

Advanced commissioning