Other Ways To Back Up Settings; Write Protection - Siemens SINAMICS G115D Operating Instructions Manual

8.3

Other ways to back up settings

In addition to the default setting, the converter has an internal memory for backing up three
other settings.
On the memory card, you can back up 99 other settings in addition to the default setting.
support.automation.siemens.com/WW/view/en/43512514)
8.4

Write protection

The write protection prevents unauthorized changing of the converter settings. If you are
working with Startdrive, write protection is only effective online. The offline project is not write-
protected.
Write protection is applicable for all user interfaces:
• Startdrive PC tool
• Parameter changes via fieldbus
• SINAMICS G120 Smart Access
No password is required for write protection.
Function description
Activate and deactivate write protection
Parameter
r7760
p7761
Exceptions to write protection
Parameters that can be changed with active write protection
Parameter
p0003
p0010
p0124[0...n]
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
Additional information is available on the Internet: Memory options
Description
Write protection/know-how protec‐
tion status
Write protection
Description
Access level
Drive commissioning parameter fil‐
ter
CU detection using LED
Data backup and series commissioning
Setting
Displays the status for the write protection and
know-how protection.
Bit 00: Write protection active
Setting for activating/deactivating the write protec‐
tion for adjustable parameters.
0: Deactivate write protection
1: Activate write protection
Factory setting: 0
Setting
Sets the access level to read and write parameters.
Sets the parameter filter to commission a drive.
Identification of the Control Unit using an LED.
8.4 Write protection
(http://
361