Siemens SINAMICS G115D Operating Instructions Manual page 206

Distributed drive for conveyor applications

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Advanced commissioning

7.9 Conveyor technology control functions (for G115D PROFINET and AS-i variants only)

The motor will have the following behavior with the end position shutdown (p3392 = 1) and

level-triggered sensor signals (p3394 = 1 or 2) activated:

• Once a stop sensor at the positive or negative position is triggered, the motor stops even if

the level is canceled.

• Once a stop sensor at the center position is triggered, the motor stops; if the level is cancelled,

then the motor runs again.

Conveyor technology control parameters (Page 220)

SINAMICS G115D Wall Mounted distributed drive

Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA