12.1 General information geared motor with SINAMICS G115D Motor Mounted / Wall Mounted
12.1.3.2
Painted version
The corrosion protection system is classified according to the corrosiveness categories in
DIN EN ISO 12944‑2.
Paint according to corrosiveness categories
Paint system
Corrosiveness category C1, unpainted for gearbox and motor housings made of aluminum
-
Paint system
Corrosiveness category C1 for normal environmental stress
1‑component hydro paint, top coat
Paint system
Corrosiveness category C2 for low environmental stress
2‑component - polyurethane top coat
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
Additional information on the SIMOGEAR geared motor
Description
•
Indoor installation
•
Heated buildings with neutral atmospheres
•
Resistance to greases and some resistance to mineral
oils, aliphatic solvents
•
Standard
Description
•
Indoor installation
•
Heated buildings with neutral atmospheres
•
Resistance to greases and some resistance to mineral
oils, aliphatic solvents
•
Standard paint for gearbox housings made of cast iron
Description
•
Indoor and outdoor installation
•
Unheated buildings with condensation, production
areas with low humidity, e.g. warehouses and sports
facilities
•
Atmospheres with low levels of pollution, frequently
rural areas
•
Resistance to greases, mineral oils and sulfuric
acid (10 %), caustic soda (10 %) and is conditionally
resistant to aliphatic solvents
429