Specific Data Motor; General Motor Information; Use As Prescribed - Siemens SINAMICS G115D Operating Instructions Manual

4. You can directly access the operating instructions via "Industry Online Support (SIOS)".
5. Use the "Search" function to display the spare parts list.
6. The installation positions of the listed spare parts can be determined based on the position
numbers specified in column "BKZ" (equipment marking) and the spare part drawings in
Chapters Spare parts list, motor (Page 474) and Replacement part lists gearbox (Page 565).
You have opened the spare parts list through Spares on Web.
12.2

Specific data motor

12.2.1

General motor information

Note
Siemens does not accept any liability for damage and operational disturbances that result from
the non-observance of these operating instructions.
These operating instructions are included with the geared motor when delivered, or you can
find them in SIOS (https://support.industry.siemens.com/cs/de/en/ps/13424/man). Read the
operating instructions before handling the motor. Carefully follow the instructions. This is
how you ensure safe and disturbance-free operation.
The described motors correspond to the state-of-the-art at the time these operating
instructions were printed.
Siemens reserves the right to change individual components and accessories in the interest
of ongoing development. The changes are designed to improve performance and safety. The
significant features are retained. The operating instructions are updated regularly with new
contents.
The latest versions of the operating instructions, the declaration of incorporation and the
declarations of conformity are available in electronic form in the Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/ps/13424/man).
12.2.2

Use as prescribed

The motors described in these operating instructions have been designed for stationary use in
general engineering applications.
They comply with the harmonized standards of the series EN 60034 (VDE 0530). They are not
approved for operation in hazardous zones and areas.
Unless otherwise agreed, the motors have been designed for use in plants and equipment in
industrial environments.
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
Additional information on the SIMOGEAR geared motor
12.2 Specific data motor
447