Siemens SINAMICS G115D Operating Instructions Manual page 171

No.
3
4
5
6
10
11
Link Object, Instance Number: F6 hex
Supported services
Class
Class Attribute
No.
1
2
3
Instance Attribute
No.
1
2
3
SINAMICS G115D Wall Mounted distributed drive
Operating Instructions, 07/2023, FW V4.7 SP14, A5E52808211A AA
Service Type Name
get, set UNIT32 Configura‐
tion Control
get UNIT16 Path Size (in
WORDs)
UNIT8 Path
get, set STRING Interface
Configura‐
UNIT32
tion
get, set UNIT16 Host Name
STRING
get, set UNIT8 Select ACD
get, set UNIT8 Last Conflict
Detected
UNIT8
UNIT8
• Get Attribute all
• Get Attribute single
Service Type
get UINT16
get UINT16
get UINT16
Service Type Name
get UINT32 Interface Speed
get Interface Flags
get ARRAY Physical Address
Value/explanation
1 hex: Saved values
3 hex: DHCP
Fixed value: 2 hex
20 hex,
F6 hex,
24 hex,
05 hex, where 5 hex is the number of instances of F6 hex
(four physical ports plus one internal port).
r61000 Name of Station
r61001 IP address
Host Name Length
local OM flash:
0: Disabled,
1: Enabled
local OM flash ACD Activity
local OM flash Remote MAC
local OM flash ARP PDU
Instance
Name
Revision
Max Instance
Num of Instances
Value/explanation
0: link down,
10: 10 Mbps,
100: 100 Mbps
Bit 1: Link-Status
Bit 2: Duplex Mode (0: halb duplex, 1 duplex
Bit 3 ... 5: Automatic state identification
Bit 6: Reset required
Bit 7: Local hardware fault (0 = ok)
r8935 Ethernet MAC address
Advanced commissioning
7.6 Drive control via Ethernet/IP
• Get Attribute all
• Get Attribute single
• Set Attribute single
169