Checking Service-Type Faults; Checking Service-Type Statistics; Checking The Total Energy Output; Checking The Amount Of Idle Time - Advanced Energy Pinnacle 20 kW Manual

Checking Service-type Faults

SERVICE → FAULTS
Customer service will use this option.

Checking Service-type Statistics

SERVICE → STATS
Use this option to check the service-type statistics.

CHECKING THE TOTAL ENERGY OUTPUT

SERVICE → STATS → ENERGY
To check the total energy output:
Press SERVICE → STATS → ENERGY.
The total energy output for the unit appears.

CHECKING THE AMOUNT OF IDLE TIME

SERVICE → STATS → TIME
To check the amount of time idle and the amount of time running, follow these steps.
1. Press SERVICE → STATS → TIME.
2. To display the amount of time idle, press the IDLE soft key.
The amount of time idle appears.
3. To display the amount of time running, press the RUN soft key.
The amount of time running appears.

CHECKING THE NUMBER OF FAULTS

SERVICE → STATS → EVENTS
To check the number of faults, follow these steps:
1. Press SERVICE → STATS → EVENTS.
FAULTS and CYCLES options appear.
2. Press the FAULTS soft key.
3. MORE, INTRLOCK, IRQS, MONITOR, and DSP options appear.
4. If you press MORE, you can check the following faults:
– MORE → PROF1 displays the number of Profibus faults
5702199-A
Page 57 of 182
I/O Communication and Control
Pinnacle™ 20 kW
4-23