Module Status Led; Table 4-5. Mod Status Led - Advanced Energy Pinnacle 20 kW Manual

Advanced Energy

MODULE STATUS LED

The MOD bi-color (amber/green) LED provides device status. It indicates whether the device
has power and is operating properly. The following table shows the LED's various states and
their meanings.

Table 4-5. MOD Status LED

If the LED is
Off
Green (steady)
Flashing Green
Amber
Flashing Amber/Green
For information on LED flash rates, refer to section 8.2.8 of the DeviceNet Specification
(revision 2.0).
For information about Module Status LED indications during power-up, refer to Section 8.2.4
of the DeviceNet Specification (revision 2.0).
4-10
Page 44 of 182
®
the state indicated is
No power
Operational
Standby
Unrecoverable Fault
Device Self-Testing
I/O Communication and Control
which means that
the unit is not receiving
power.
the unit is operating
normally.
the unit needs maintenance
because the configuration is
missing, incomplete, or
incorrect.
the unit has experienced a
fault from which it cannot
recover; you may need to
replace the unit.
the unit is running self
diagnostics
5702199-A