Electrical Specifications - Advanced Energy Pinnacle 20 kW Manual

Advanced Energy

ELECTRICAL SPECIFICATIONS

The following table lists the electrical specifications.
Table 3-3. Electrical Specifications
208 Vac Pinnacle Input
Voltage
208 Vac Pinnacle Input
Current
400 Vac Pinnacle Input
Voltage
400 Vac Pinnacle Input
Current
480 Vac Pinnacle Input
Voltage
480 Vac Pinnacle Input
Current
Output Accuracy
Line Regulation
Load Regulation
Repeatability
Temperature Coefficient
3-4
Page 28 of 182
®
Not available for this configuration
Not available for this configuration
Not available for this configuration
Not available for this configuration
432 to 528 Vac, 3-phase, 4-wire, 50 to 60 Hz, no neutral
required; leakage current less than 3.5 mA
28 A nominal per phase, at least 90% EFF; 40 A circuit
breaker
Accuracy of actual output to readback value at 25ºC is
±1% of the setpoint value (V, kW, or A) or ± 0.2% of
the full rated output (whichever is greater) for the full
input voltage range and output impedance range.
No accuracy derating for line voltages within the
specified input voltage range
No accuracy derating for impedances within the
specified output impedance range
Output power repeatability from run to run at a constant
setpoint is 0.1% from 10% to 100% of rated power.
<0.005%/°C (<50ppm/°C) variation in the regulated
output parameter over a 20°C to 40°C ambient
temperature range
Specifications 5702199-A