Regulation Switches; Two-Line Output Display Screen - Advanced Energy Pinnacle 20 kW Manual

Advanced Energy

Regulation Switches

Use these switches to select the method of output regulation when the control panel has
control.
POWER
CURRENT
VOLTAGE

Two-Line Output Display Screen

The display screen displays two lines of information. When you first power up, the display
screen appears.
The following information appears in the top line of the display (left to right):
– Voltage readback
– Current readback (in amps)
– Power readback (in watts)
– Setpoint source (i = internal, e = external)
– Setpoint
The following information appears in the bottom line of the display (left to right):
– Unit Configuration Field
• M/S: Master or slave
• J: Joule mode enabled
• L: Target life counter enabled
• S: Setpoint timer enabled
• V: Process voltage monitor enabled
4-18
Page 52 of 182
®
Specifies that the method of output regulation is power.
Specifies that the method of output regulation is current.
Specifies that the method of output regulation is voltage.
I/O Communication and Control 5702199-A