Advanced Energy Pinnacle 20 kW Manual page 91

Table 4-18. Host Port Commands
Command
7
set arc
average
window
5702199-A
Page 91 of 182
Description
Sets the size of the arc average window
between 1 and 10 seconds. This value
changes the arcs-per-second display and
the return values from Command 188.
When the window is set for 1 second,
arcs per second will reflect the actual
number arcs per second. When the
window is set for a value greater than 1
second, arcs per second will reflect the
average number of arcs per second over
the length of the window (actual arcs
over the number of seconds in the
window).
When the arc average window value is
changed, the new value remains in effect
for subsequent power ups. Send 1 data
byte (8-bit value).
Read back this value with Command 192.
I/O Communication and Control
Pinnacle™ 20 kW
Number of Number of
Transmit Response
Data Bytes Data Bytes
1 CSR only
4-57