Advanced Energy Pinnacle 20 kW Manual page 120

Advanced Energy
Table 4-18. Host Port Commands
Command
220
request
customer
service
statistics
230
request logic,
panel, or dsp
crc
4-86
Page 120 of 182
®
Description
Requests unit statistics. Send 1 data byte
(8-bit value):
0 = Total output in kilowatt-hours
1 = Total idle time
2 = Total run time
3 = Total unit on events
4 = Total output on events
5 = Total over-temperature events
6 = Total control circuit faults
7 = Total out-of-setpoint events
8 = Total hard bus fault events
9 = Total power fluctuation events
10 = Total process voltage low
events
11 = Total Side A inverter low
events
12 = Total Side B inverter low
events
13 = Total user interlock open
events
14 = Total cable interlock open
events
15 = Total contactor interlock open
events
18 = Total Profibus fault events
19 = Total pre-defined interrupt
events
20 = Total unassigned interrupt
events
22 = Total dsp watchdog faults
24 = 10 ms Bus fault events
Requests the crc of the logic, front panel
or dsp. Returning packet contains 2 data
bytes (16-bit value). To receive the logic
crc, first send Command 24, which
calculates the value. To receive the front
panel crc, first send Command 25. With
Command 230, send one data byte:
• 0 = logic
• 1 = front panel
• 2 = dsp
I/O Communication and Control
Number of Number of
Transmit Response
Data Bytes Data Bytes
1 4
1 2
5702199-A