Checking Service-Type Faults; Checking Service-Type Statistics; Checking The Total Energy Output; Checking The Amount Of Idle Time - Advanced Energy Pinnacle User Manual

®
Advanced Energy
• MEMORY: ROM CRC checksums
• SW_REV: software revision numbers

Checking Service-type Faults

SERVICE → FAULTS
Customer service will use this option.

Checking Service-type Statistics

SERVICE → STATS
Use this option to check the service-type statistics.

CHECKING THE TOTAL ENERGY OUTPUT

SERVICE → STATS → ENERGY
To check the total energy output:
1. Press SERVICE → STATS → ENERGY.
4 The total energy output for the unit appears.

CHECKING THE AMOUNT OF IDLE TIME

SERVICE → STATS → TIME
To check the amount of time idle and the amount of time running:
1. Press SERVICE → STATS → TIME.
2. To display the amount of time idle, press the IDLE soft key.
4 The amount of time idle appears.
3. To display the amount of time running, press the RUN soft key.
4 The amount of time running appears.

CHECKING THE NUMBER OF FAULTS

SERVICE → STATS → EVENTS
To check the number of faults:
1. Press SERVICE → STATS → EVENTS.
4 FAULTS and CYCLES options appear.
2. Press the FAULTS soft key.
4-24 I/O Communication and Control 5702156-E