Slave Status High Byte; Personality Card Status - Advanced Energy Pinnacle 20 kW Manual

SLAVE STATUS HIGH BYTE

BIT 7 6 5 4 3 2 1 0
| | | | |
| | | | |
| | | | |
| | | | |................ Interlock open
| | | |......................Contactor not closed
| | |...........................Reserved
| |...............................Reserved
|.....................................Reserved

PERSONALITY CARD STATUS

BIT 7 6 5 4 3 2 1 0
| | | | |
| | | | |
| | | | |
| | | | |................ Bad function
| | | |......................Reserved
| | |...........................External off received
| |...............................Slave not responding
|.....................................Dual port ram error
See Table 7-3 on page 7-6 and "Error Code Troubleshooting Table" on page 7-8 to determine
the proper action to take in response to any fault indicated in the status bytes. If you are unsure
how to respond, please contact AE Global Support.
5702199-A
Page 171 of 182
| | | Control circuit fault
| |......Configuration fault
|...........Over-temperature fault
| | | Initialization error
| |......Multiple Masters
|...........Bad address range
Troubleshooting and Customer Support
Pinnacle™ 20 kW
7-17