Icom IP1000C Instruction Manual page 96

4
ABOUT THE SETTING SCREEN
8. [Transceiver Settings] Menu
■ Transceiver Settings [IP100H]
12
13
14
15
16
17
18
(This is only an example.)
Priority Call �������
14
Change the target during communication with the Priority Call function enabled
IP100H
Select whether the IP100H uses the Priority Call or not.
The priority levels of the Call types are in the following order.
Priority
level
High
Low
* Selectable in the Call Type Priority item in the [RoIP Server] screen in the
[RoIP Server settings] menu.
L The priority is given to the first call between calls with the same priority level.
L The reply call follows the priority level of the talk side.
IP1000C
Wireless
access point
Making an Individual Call
Group Call
[Transceiver Settings]–[Transceiver Settings]
Priority Call type
Telephone
Fixed
Emergency (High)
Emergency (Normal)
All Call (High)
Individual Call (High)
Selectable *
Group Call (High)
All Call (Normal)
Individual Call (Normal) Disable —
Group Call (Normal)
during communication
4-43
(Default: Disable)
Priority
Remarks
Call
For telephone
—
communication
Enable —
Disable —
Includes the Area
Enable Call or calling from
an IP100FS
Includes from an
Enable
IP100FS
Includes the Area
Enable Call or calling from
an IP100FS
Disable Includes the Area Call
Disable Includes the Area Call
Group Call
Individual Call