Icom IP1000C Instruction Manual page 161

4
ABOUT THE SETTING SCREEN
8. [Transceiver Settings] Menu
■ Transceiver Settings [IP110H]
84
85
86
87
88
89
90
91
(This is only an example.)
Automatic Firmware Updating
88
at Power ON ������ Select whether the IP110H will use the Automatic Update function or
not.
• Disable
Disables the automatic firmware updating at the IP110H turns ON.
• Enable (without Automatic Reboot)
When this setting is set to "Enable (without Automatic Reboot)," the
IP110H works as follows.
1. The IP110H confirms the latest firmware in the IP1000C when
turning ON.
2. The IP110H automatically downloads the firmware if it needs to
update.
3. The IP110H will be updated when it is turned ON again.
• Enable (with Automatic Reboot)
When this setting is set to "Enable (with Automatic Reboot)," the
IP110H works as follows.
1. The IP110H confirms the latest firmware in the IP1000C when
turning ON.
2. The IP110H automatically downloads the firmware if it needs to
update.
3. The IP110H is updated automatically, and then it is rebooted.
L You can check the firmware version of the IP110H on the [TOP] menu.
4-108
[Transceiver Settings]–[Transceiver Settings]
(Default: Enable (with Automatic Reboot))