Icom IP1000C Instruction Manual page 206

4
ABOUT THE SETTING SCREEN
11. [Management] Menu
■ Administrator Password
Set the administrator password.
1
2
3
4
Username ��������
1
Current Password ����
2
New Password �����
3
New Password (confirm) �
4
<Apply> ��������
5
<Reset> ��������
6
CAUTION: If you have forgotten the password, you cannot access the IP1000C's setting screen again.
In this case, you have to initialize the IP1000C using the <INIT> button. See page 5-4 for details.
To prevent unauthorized access
You must be careful when choosing your password.
• Choose one that is not easy to guess.
• Use numbers, characters and letters (both lower and upper case).
Displays the administrator login ID ("admin").
Enter the current password, when you change it.
L The entered characters are displayed as an * (asterisk) or a • (dot).
Enter a new password up to 31 characters.
L The entered characters are displayed as an * (asterisk) or a • (dot).
Enter the new password again.
Click to apply the entries.
Click to restore the settings.
L You cannot restore after clicking <Apply>.
4-153
[Management]–[Administrator]
5 6
(Default: admin)