Icom IP1000C Instruction Manual page 122

4
ABOUT THE SETTING SCREEN
8. [Transceiver Settings] Menu
■ Transceiver Settings [IP110H]
11
12
13
14
15
16
17
18
(This is only an example.)
PTT Call at Stand-by ���
11
Select whether the IP110H displays the Destination ID (Call type) in the
standby mode or not.
• Enable
The Destination ID (Call type) is displayed on the standby mode.
L When the PTT on the IP110H is pushed, the IP110H calls the displayed ID
(Call type).
• Disable
The Destination ID (Call type) is not displayed on the standby mode.
L The Destination ID (Call type) is displayed when you select the ID using
function keys.
4-69
[Transceiver Settings]–[Transceiver Settings]
(Default: Enable)