Download
Share
Print this page
Icom IP100H Demonstration Setup Manual
  1. Manuals
  2. Brands
  3. Icom Manuals
  4. Two-Way Radio
  5. IP100H
  6. Demonstration setup manual

Icom IP100H Demonstration Setup Manual

Ip advanced radio system
Hide thumbs Also See for IP100H:

Advertisement

Quick Links

See also: Instruction Manual , Instructions
Version 1.0
March 2014
IP Advanced Radio System
IP100H / IP1000C / IP100FS
Demonstration Setup
Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the IP100H and is the answer not in the manual?

Questions and answers

Related Manuals for Icom IP100H

Summary of Contents for Icom IP100H

  • Page 1 Version 1.0 March 2014 IP Advanced Radio System IP100H / IP1000C / IP100FS Demonstration Setup Guide...
  • Page 2 If you have any questions about this guide, please contact your local Icom distributors. Guide Revisions Icom reserves the right to make changes to the content of this guide at any time without notice or obligation. Trademarks Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia, Japan and/or other countries.

  • Page 3: Table Of Contents

    DGX-IP1000C/IP100H -V1.0 TABLE OF CONTENTS SECTION 1 REQUIRED EQUIPMENT ..................... 1 SECTION 2 SETTING EXAMPLES ......................2 STAND ALONE NETWORK CONNECTION AND IP ADDRESS SETTINGS .... 2 IP NETWORK CONNECTIONS AND SETTING EXAMPLES ........9 HOW TO SET AND USE THE ID LIST ..............16 HOW TO ENTER AND SEND A MESSAGE .............

  • Page 4: Section 1 Required Equipment

    8 (32/64bit)  7 (32/64bit) • Windows  (32bit) • Windows Vista (Home Premium / Professional / Ultimate (or equivalent) editions are supported.) CLONING CABLES CLONING SOFTWARE (For IP100H, both cables are (For IP100H) CS-IP100H required) • OPC-2144 • OPC-478UC...

  • Page 5: Section 2 Setting Examples

    SECTION 2 SETTING EXAMPLES STAND ALONE NETWORK CONNECTION AND IP ADDRESS SETTINGS Set an access point, PC, IP1000C and IP100H using the following steps. IMPORTANT! We recommend that you connect the access point, IP1000C and PC in a standalone configuration. If you connect them to your local network with the following connection settings, your local network may not operate correctly.
  • Page 6 STEP 3: IP1000C SETTINGS Setting steps are as follows. STEP 3-1 The DHCP Server settings STEP 3-2 Common settings STEP 3-3 The IP100H (TR 1) settings STEP 3-4 The IP100H (TR 2) settings STEP 3-1 The DHCP Server settings Click...
  • Page 7 DGX-IP1000C/IP100H -V1.0 STEP 3-2 Common settings Click Click Confirm...
  • Page 8 DGX-IP1000C/IP100H -V1.0 STEP 3-3 The IP100H (TR 1) settings Click Enter Click STEP 3-4 The IP100H (TR 2) settings Enter Click [Confirm the IP100H (TR 1 and TR 2) settings] Confirm...
  • Page 9 STEP 5 STEP 4: IP100H SETTINGS (A CS-IP100H is necessary to set up the IP100H) BEFORE you use a CS-IP100H, the following procedures are required. See the CS-IP100H and OPC- 478UC instruction manuals for setting and installation details. • Install the CS-IP100H (Cloning software) •...
  • Page 10 DGX-IP1000C/IP100H -V1.0 STEP 4-2 TR 2 settings Enter the same SSID as the access point Select Enter the same PSK as the access point (Enter “5cf97dgh6” here) IP1000C’s setting screen...
  • Page 11 Your voice is heard from TR 1’s speaker. After speaking, release [PTT] to listen. CONVENIENT! When you use the IP100H with optional HM-153LS or HM-166LS EARPHONE-MICROPHONE, you can use the IP100H in hand-free operation (full duplex mode). Full duplex communication can be made !

  • Page 12: Ip Network Connections And Setting Examples

    If you want to connect the IP ADVANCED SYSTEM to an existing IP network, set an access point, PC, IP1000C and IP100H as shown in the following steps. IMPORTANT! Two static IP addresses are required for setting of the access point and the IP1000C. Ask your system administrator for details for about the IP addresses.
  • Page 13 Ask your system administrator for the access point’s IP address, and then enter it into the access point field, and then set the SSID to WAVEMASTER-0. IMPORTANT! If you turn ON the Hide SSID function on IEEE802.11a, IP100H may not connect to the access point.
  • Page 14 The setting steps are as follows: STEP 4-1 The DHCP Server confirming STEP 4-2 Common settings STEP 4-3 The IP100H (TR 1) setting STEP 4-4 The IP100H (TR 2) setting STEP 4-1 The DHCP Server confirming If another DHCP server is already working in the IP network, confirm to turn OFF the IP1000C’s DHCP server function as follows.
  • Page 15 DGX-IP1000C/IP100H -V1.0 STEP 4-3 The IP100H (TR 1) settings Click Enter Click STEP 4-4 The IP100H (TR 2) settings Enter Click [Confirm the IP100H (TR 1 and TR 2) settings] Confirm...
  • Page 16 STEP 3 STEP 4 STEP 5 STEP 6 STEP 5: IP100H SETTINGS (A CS-IP100H is necessary to set up the IP100H) The setting steps are as follows. STEP 5-1 TR 1 settings STEP 5-2 TR 2 settings STEP 5-1 TR 1 settings...
  • Page 17 DGX-IP1000C/IP100H -V1.0 STEP 5-2 TR 2 settings Enter the same SSID as the access point Select Enter the same PSK as the access point (Enter “5cf97dgh6” here) IP1000C’s setting screen NOTE: Ask your system administrator for the IP1000C’s IP address.
  • Page 18 Your voice is heard from TR 1’s speaker. After speaking, release [PTT] to listen. CONVENIENT! When you use the IP100H with optional HM-153LS or HM-166LS EARPHONE-MICROPHONE, you can use the IP100H in hand-free operation (full duplex mode). Full duplex communication can be made !

  • Page 19: How To Set And Use The Id List

    DGX-IP1000C/IP100H -V1.0 HOW TO SET AND USE THE ID LIST BEFORE you set the ID list, you must first complete the steps in 2-1 STAND ALONE NETWORK CONNECTION AND IP ADDRESS or 2-2 IP NETWORK CONNECTIONS AND SETTING EXAMPLES. The IP1000C has an ID list function. If you want to initiate a group call or an individual call, register the name and ID into the list.
  • Page 20 DGX-IP1000C/IP100H -V1.0 STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 2: ENTER THE DESTINATION ID Select the individual and group numbers in the ID list. If you want to enter two or more destination IDs, repeat STEP 2.
  • Page 21 DGX-IP1000C/IP100H -V1.0 STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 3: ID LIST GROUP NUMBER SETTING Select the same ID list group number that was set in step 2, in the ID List. For demonstration purposes, enter the same number.
  • Page 22 STEP 3 STEP 2 STEP 4 STEP 5 STEP 4: USE ID LIST SETTING The setting steps are as follows. STEP 4-1 The IP100H (TR1) settings STEP 4-2 The IP100H (TR2) settings. STEP 4-1 The IP100H (TR1) settings Click Select Select...
  • Page 23 DGX-IP1000C/IP100H -V1.0 STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 5: DEMONSTRATION Push Push Exit the ID list mode Enter the ID list mode Push Push Push Group Individual 0001 0001 Sales1 Group Call Push Push Push...

  • Page 24: How To Enter And Send A Message

    DGX-IP1000C/IP100H -V1.0 HOW TO ENTER AND SEND A MESSAGE BEFORE you enter a message, you must first complete the steps in 2-1 STAND ALONE NETWORK CONNECTION AND IP ADDRESS or 2-2 IP NETWORK CONNECTIONS AND SETTING EXAMPLES. IP1000C has a message function. The message function is convenient to send messages by only pushing [PTT], without speaking.
  • Page 25 DGX-IP1000C/IP100H -V1.0 STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 2: ENTER THE DESTINATION ID Select the individual and group numbers in the ID list. If you want to enter two or more destination IDs, repeat STEP 2.
  • Page 26 DGX-IP1000C/IP100H -V1.0 STEP 2 STEP 3 STEP 5 STEP 6 STEP 1 STEP 4 STEP 3: SELECT THE MESSAGE GROUP NUMBER AND ENTER THE MESSAGE You select a message group number from 1 to 100, and enter up to 10 messages.
  • Page 27 DGX-IP1000C/IP100H -V1.0 STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 4: SELECT THE ID AND MESSAGE LIST Select the same ID and Message Lists number that was set in steps 2 and 3. For demonstration purposes, enter the same number.
  • Page 28 STEP 4 STEP 5 STEP 6 STEP 5: USE ID LIST AND MESSAGE SETTING The setting steps are as follows. STEP 5-1 The IP100H (TR1) settings STEP 5-2 The IP100H (TR2) settings. STEP 5-1 The IP100H (TR1) settings Click Select...
  • Page 29 DGX-IP1000C/IP100H -V1.0 STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 6: DEMONSTRATION Push Push Exit the Message select mode Enter the Message select mode Message ALL Member Good morning Push Select a message Next or previous messages appear.

  • Page 30: How To Set And Use The Ip100Fs

    DGX-IP1000C/IP100H -V1.0 HOW TO SET AND USE THE IP100FS Set an access point, PC, IP1000C, IP100H, and IP100FS using the following steps. IMPORTANT! We recommend that you connect the access point, IP1000C and PC in a standalone configuration. If you connect them to your local network with the following connection settings, your local network may not operate correctly.
  • Page 31 STEP 6 STEP 2: ACCESS POINT SETTINGS Set your access point’s IP address to 192.168.0.50, and SSID to WAVEMASTER-0. IMPORTANT! If you turn ON the Hide SSID function when using IEEE802.11a, IP100H may not connect to the access point. [RECOMMENDATION] We recommend that you set the access point’s authentication as follows:...
  • Page 32 DGX-IP1000C/IP100H -V1.0 STEP 3-2 Common settings Click Click Confirm STEP 3-3 Area Call settings Click Enter Area name Enter the Access Point’s BSSID Click [Confirm the Area name and BSSID settings] Confirm...
  • Page 33 DGX-IP1000C/IP100H -V1.0 STEP 3-4 The IP100H (TR 1) settings Click Enter Click STEP 3-5 The IP100H (TR 2) settings Enter Click [Confirm the IP100H (TR 1 and TR 2) settings] Confirm...
  • Page 34 DGX-IP1000C/IP100H -V1.0 STEP 3-6 The IP100FS settings Click Select Enter Click [Confirm the IP100H (TR 1 and TR 2) and IP100FS settings] Confirm...
  • Page 35 DGX-IP1000C/IP100H -V1.0 STEP 3-7 Group ID settings (If required) NOTE: If you want to use the IP ADVANCED SYSTEM to make only individual calls, skip this step. Set the ID list group to make group calls. Enter the group call number and select the group members into this step.
  • Page 36 DGX-IP1000C/IP100H -V1.0 STEP 3-8 Enter the destination ID Select the individual and group numbers in the ID list. If you want to enter two or more destination IDs, repeat STEP 2. (Setting example) Name Call Type Destination ID Sales1 Individual...
  • Page 37 DGX-IP1000C/IP100H -V1.0 STEP 3-9 Select the message group number and enter the message You select a message group number from 1 to 100, and enter up to 10 messages. (Setting example) • Message Group Number: 1 • Enter messages as follow.
  • Page 38 DGX-IP1000C/IP100H -V1.0 STEP 3-10 Select the ID and message lists Select the same ID and Message Lists number that was set in 3-8 and 3-9. For demonstration purposes, enter the same number. Click Click Select the common settings number Select...
  • Page 39 DGX-IP1000C/IP100H -V1.0 STEP 3-11 Use ID and message setting The setting steps are as follows. STEP 3-11-1 The IP100H (TR1) settings STEP 3-11-2 The IP100H (TR2) settings. STEP 3-11-1 The IP100H (TR1) settings Click Select Select Select Select Click STEP 3-11-2 The IP100H (TR2) settings...
  • Page 40 STEP 6 STEP 4: IP100H SETTINGS (A CS-IP100H is necessary to set up the IP100H) BEFORE you use a CS-IP100H, following procedures are required. See the CS-IP100H and OPC-478UC instruction manuals for setting and installing details. • Install the CS-IP100H (Cloning software) •...
  • Page 41 DGX-IP1000C/IP100H -V1.0 STEP 4-2 TR 2 settings Enter the same SSID as the access point Select Enter the same PSK as the access point (Enter “5cf97dgh6” here) IP1000C’s setting screen...
  • Page 42 DGX-IP1000C/IP100H -V1.0 STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 5: IP100FS SETTINGS  IMPORTANT! Set the IP100FS’s Windows Firewall to permit before using IP100FS. The setting steps are as follows. STEP 5-1 Login to the IP100FS...
  • Page 43 DGX-IP1000C/IP100H -V1.0 STEP 5-2 IP100FS settings IP1000C’s screen Click Select Show Click...
  • Page 44 DGX-IP1000C/IP100H -V1.0 STEP 5-3 Adding an access point icon in location window Right-click, and select Enter the access point’s name and BSSID Enter (If necessary) Enter (If necessary) Click The added Access Point appears The connected IP100Hs appear...
  • Page 45 DGX-IP1000C/IP100H -V1.0 STEP 5-4 ID list setting Click Enter Select Click STEP 5-5 Message setting Click Enter Click...
  • Page 46 DGX-IP1000C/IP100H -V1.0 STEP 5-6 One-touch button setting Enter the following setting to each buttons. One-touch button Button 1 Button 2 Button 3 Button 4 Name IP100H (TR1) IP100H (TR2) ALL CALL Group 1 Individual Individual Group Call Type Destination ID...
  • Page 47 DGX-IP1000C/IP100H -V1.0 Appear Repeat same one-touch button settings for Button 2, Button 3 and Button 4.
  • Page 48 [PTT] to speak to the target user. (4) Hold down TR 1 (IP100H)’s [PTT], and then speak into the microphone at a normal voice level. The IP100FS displays the following screen, and then your voice is heard from the headset via through IP100FS.
  • Page 49 TR 1 Access point IP1000C IP100FS (1) Turn ON TR 1’s power (IP100H), and start up the IP100FS. (2) Push to select the IP100FS’s ID. While pushing and holding TR 1’s [PTT], speak into the microphone at a normal voice level.
  • Page 50 (3) Select the desired message from the list. The selected message is displayed. (4) Click [TR1] on the IP100FS to select the desired IP100H that you want to send a message to. Click the desired button that you want to send a message to.
  • Page 51 DGX-IP1000C/IP100H -V1.0 When sending a message from a TR 1 (IP100H) to an IP100FS Sending a message! TR 1 Access point IP1000C IP100FS (1) Turn ON TR 1’s power, and start up the IP100FS. (2) Push to enter the message select mode, and then select a desired message.
  • Page 52 DGX-IP1000C/IP100H -V1.0 STEP 6-3 USING THE LOCATION WINDOW When area calling from the IP100FS to an access point (All Call) What is Area Calling? If two or more access points are used on an IP network, you can communicate to only IP100Hs that are connected to a specified access point, by using the Area Calling function.
  • Page 53 When calling from the IP100FS to a specified IP100H (Individual Call) Access point IP1000C IP100FS TR 1 (1) Click the IP100H (TR 1) icon, and then the selection detail is displayed on the IP100FS screen. Click Selection detail displayed (2) Click and hold IP100FS’s [PTT], and then speak into the microphone at a normal voice level.

  • Page 54: Q & A

    The remote control lock is only activated and is locked by the IP100FS, does the when the IP100H is online. If you want to lock IP100H remain locked when it enters the the IP100H when it enters the range again,...
  • Page 55 IP100H? calls. Up to 100 sets of the IP100H can connect IP100H’s number must be registered. to a IP1000C. However, if you have 120 Therefore, more than 100 IP100Hs cannot be sets of IP100H, and you turn OFF 20 of registered.
  • Page 56 Is there any problem or function limitation Almost any access point can be used. But, when using 3rd party access points, we recommend you to use Icom’s access rather than Icom access points? point. How can we know when the number of...

This manual is also suitable for:

Ip1000cIp100fs