Icom IP1000C Instruction Manual page 95

4
ABOUT THE SETTING SCREEN
8. [Transceiver Settings] Menu
■ Transceiver Settings [IP100H]
12
13
14
15
16
17
18
(This is only an example.)
Volume
12
(Except Reception Notice)
Communication Method �
13
Simplex and Full-Duplex
Set the beep level when the IP100H transmits a Call or connecting to
the IP1000C to between 0 and 32.
L When this setting is set to "0," the notification beep becomes OFF.
L Depending on the [Common Settings], the IP100H sounds beeps when the
IP100H is transmitting or connecting to the IP1000C.
Select the communication method that the IP100H uses.
• Simplex
Toggles the transmission (Talker) and reception (Listener) by turns for
communication.
• Full-Duplex
Operates the transmission and reception simultaneously like a
telephone.
L When connecting the optional microphone to the IP100H, you can operate
the IP100H like a telephone.
IP1000C
Simplex
IP100H
[Transceiver Settings]–[Transceiver Settings]
Full-Duplex
4-42
(Default: 10)
(Default: Full-Duplex)
Wireless
access point