Icom IP1000C Instruction Manual page 74

4
ABOUT THE SETTING SCREEN
6. [Tenant (Fleet) Settings] Menu
■ Tenant (Fleet)
The tenant (fleet) divides the WLAN transceivers or IP100FSs which belong to this IP1000C for a system
management purpose. (Example: Security company/Commissioned company)
L The terminals cannot communicate among different tenants (fleets).
1
2
Tenant (Fleet) Number ��
1
Tenant (Fleet) Name ���
2
<Apply> ��������
3
<Reset> ��������
4
Select the tenant (fleet) number that is registered or edited. (Default: 1)
Enter the tenant (fleet) name. (Up to 31 characters)
The tenant (fleet) name is displayed on the following menus.
- RoIP Server Settings
- Transceiver Settings
- Common Settings (Except Wireless LAN menu)
- Destination Settings
(This is only an example.)
Click to apply the entries.
Click to restore the settings.
L You cannot restore after clicking <Apply>.
4-21
[Tenant (Fleet) Settings]–[Tenant (Fleet)]
The Tenant (Fleet) name is displayed here
3 4
(Default: Tenant1)