Icom IP1000C Instruction Manual page 153

4
ABOUT THE SETTING SCREEN
8. [Transceiver Settings] Menu
■ Transceiver Settings [IP110H]
63
64
65
66
67
68
69
70
71
72
(This is only an example.)
With Stationary �����
72
Select whether or not to use the Lone Worker function with the
Stationary function option.
If this item is set to "Enable," Reminder Timer is started when:
• No operation occurs for Lone Worker's ON Timer period.
AND
• The user is detected as stationary for the Lone Worker's ON Timer
period.
After the Reminder Timer period ends, the emergency call is
transmitted.
L The stationary status is detected by Stationary Sensitivity.
L When the transceiver is operated, or when the user moves the transceiver
during the Reminder Timer period, Lone Worker's ON Timer and Reminder
Timer are reset.
Example:
ON Timer: 60 minutes
Reminder Timer: 60 seconds
Reminder beep
sounds.
60 min.
ON Timer
Stationary is
detected.
[PTT] [PTT] [PTT]
No operation
is detected.
Time
4-100
[Transceiver Settings]–[Transceiver Settings]
The Emergency
function turns ON.
60 sec.
Reminder Emergency
Timer call
Stationary
Sensitivity
(Default: Disable)