Icom IP1000C Instruction Manual page 173

4
ABOUT THE SETTING SCREEN
9. [Common Settings] Menu
■ ID List
Enters target IDs in the group that is selected in the "ID List Common Settings" field.
L You can enter up to 50 target IDs in each group.
1
2
3
4
5
6
This is an example when group 1 is selected in the [ID List Common Setting] field.
If the name is not edited, displays only the item name.
Add Type ��������
1
No. �����������
2
Name ����������
3
Nickname ��������
4
Call Type ��������
5
Destination ID ������
6
<Apply> ��������
7
<Reset> ��������
8
Select the "Enter Individually" or "Select From List" Add Type.
When the "Select From List" is selected, the Destination IDs that are
registered in the [Transceiver Registration] screen or [Destination
Settings] screen, are displayed.
L By clicking the [All] box, you can select or cancel all entries in the list.
Select a number to register the destination.
Up to 50 destinations can be registered to a group.
Enter a destination name of up to 32 characters.
Enter a nickname of up to 32 characters, if necessary.
Select the "Individual," "Group," "Talkgroup" or "Telephone" Call type.
Enter the target Individual ID (00001 ~ 60000), Group ID (00001 ~
60000) or Talkgroup ID (00001 ~ 60000).
When "Telephone" is selected as the "Call Type," enter a target phone
number of up to 31 digits using numbers and symbols (#, ).
Click to apply the entries.
Click to restore the settings.
L You cannot restore after clicking <Apply>.
4-120
[Common Settings]–[ID List]
7 8