Icom IP1000C Instruction Manual page 106

4
ABOUT THE SETTING SCREEN
8. [Transceiver Settings] Menu
■ Transceiver Settings [IP100H]
19
20
21
22
23
(This is only an example.)
Target Availability Check �
22
Key-Touch Beep �����
23
Select whether the IP100H displays a confirmation after it makes an
Individual Call, or not.
When "Enable" is selected, the IP100H displays the "Connected,"
"Busy" or "No response" connection status.
1/24 16:57
Connected
L When the target station is out of range, "No response" is displayed.
L If the "Connection Notice Tone" item is set to "Enable," the Success Tone or
Failure Tone sounds to notify its connection status.
Common Settings (menu) > Common Settings (screen) > Common Settings
> Connection Notice Tone
Select whether the IP100H sounds the key touch beep or not.
When "Disable" is selected, the IP100H does not sound the
confirmation beep when a key is pushed.
• Level
Set the volume level of the notification beeps when the IP100H's key
is pushed.
Selectable range are between 0 and 10.
L When "0" is selected on this setting, IP100H does not sound any beep
even if the volume level is set.
L When selecting "Disable," this setting is grayed out and the volume level
cannot be changed.
4-53
[Transceiver Settings]–[Transceiver Settings]
(Default: Enable)
(Default: Enable)
(Default: 10)