Icom IP1000C Instruction Manual page 67

4
ABOUT THE SETTING SCREEN
4. [Network Settings] Menu
■ Static DHCP
Enter MAC and static IP addresses to the DHCP server.
L You can enter up to 32 entries.
Static DHCP ��������
■ Static DHCP Table
Displays the static DHCP entries.
<Delete> ���������
Enter the MAC and IP addresses, and then click <Add>.
L Make sure that the addresses of the devices on the network do not overlap
conflict.
or
If a DHCP server is already connected to the network, and there is
an address conflict, a network problem will occur.
See the Troubleshooting section for possible solutions.
Click <Delete> to remove the entry.
4-14
[Network Settings]–[DHCP Server]