Icom IP1000C Instruction Manual page 110

4
ABOUT THE SETTING SCREEN
8. [Transceiver Settings] Menu
■ Transceiver Settings [IP100H]
33
34
35
36
37
38
39
40
41
(This is only an example.)
Emergency �������
33
Assign Emergency to
34
Log Key (long press) ��
Emergency: Enable
Emer SW ON Timer ���
35
Emergency: Enable
Emer SW OFF Timer ���
36
Emergency: Enable
Emergency Alert Tone ��
37
Emergency: Enable
Select whether or not to use the emergency function. (Default: Disable)
Holding down the [Option] or [Log] key until "Emergency" is displayed
turns ON the Emergency function, and sends an emergency call to the
previously set User ID.
The emergency call is canceled when an RX code is received, or
holding down the [Option] or the [Log] key for set period of time in
"Emer SW OFF Timer" (36).
• The time of period for which the key must be held to turn the
emergency function ON or OFF is set in [Emer SW ON Timer] item (35)
or [Emer SW OFF Timer] item (36).
Select whether to use the [ ] key to send an emergency call or not.
Enter the time period for which [Option] or [Log] must be held to turn
the emergency function ON.
Select whether or not to cancel the emergency call by pushing [Option]
or [Log].
When "Enable" is selected, enter the time period for which [Option] or
[Log] must be pushed and held to turn OFF the emergency function,
between 1 to 10.
Select whether or not to sound an alarm when the emergency call is
sent.
When this item is set to "Disable," IP100H sends the emergency call
silently, without any alert on itself.
When "Enable" is selected, set the Volume (audio level) of the alarm to
between 0 and 32.
4-57
[Transceiver Settings]–[Transceiver Settings]
(Default: Enable)
(Default: 5 seconds)
(Default: Disable)
(Default: 2 seconds)
(Default: Enable)
(Default: 32)