Icom IP1000C Instruction Manual page 223

4
ABOUT THE SETTING SCREEN
11. [Management] Menu
■ Automatic Update
The firmware can be automatically downloaded and updated.
1
Automatic Update ����
1
<Apply> ��������
2
<Reset> ��������
3
■ Manual Update
The firmware can be updated using the saved firmware.
1
2
Select the update file ��
1
Firmware Update ����
2
Select "Enable" to use the Automatic Update function. (Default: Enable)
L Select "Disable" if you do not desire to automatically update the firmware.
Click to apply the entries.
Click to restore the settings.
L You cannot restore after clicking <Apply>.
Click <Choose File> to select the firmware file (extension: "dat").
L The selected file appears in the "Update Firmware using File" item.
Click <Update> to update the firmware.
Note: After updating, the IP1000C automatically reboots.
4-170
[Management]–[Firmware Update]
2 3