Icom IP1000C Instruction Manual page 92

4
ABOUT THE SETTING SCREEN
8. [Transceiver Settings] Menu
■ Transceiver Settings [IP100H]
1
2
3
4
5
6
(This is only an example.)
PTT Call at Stand-by ���
6
Select whether the IP100H displays the Destination ID (Call type) in the
standby mode or not. (Default: Enable)
• Enable
The Destination ID (Call type) is displayed on the standby mode.
L When the PTT on the IP100H is pushed, the IP100H calls the displayed ID
(Call type).
• Disable
The Destination ID (Call type) is not displayed on the standby mode.
L The Destination ID (Call type) is displayed when you select the ID using
function keys.
4-39
[Transceiver Settings]–[Transceiver Settings]